Installation Instructions of AFDB Window Privacy Film Frosted Home Office Film Non-Adhesive Wide Window Stickers Glass Film:

Step 1. Keep Window or Glass Clean

Step 2. Measure the window and determine size

Step 3. If you need to cut,draw lines the window film with markers. Make sure the edge of the protective film and the glass surface have a 1cm gap.

Step 4. Wet the Window or Glass with water( the more flowing water, the better)

Step 5. Remove the Static Film from backing protect sheet ( Please MAKE SURE you have removed it before you apply the matte window film to glass), if it is difficult to tear off the protective film, you can try to tape the two sides with duct tape and then peel off.

Step 6. Squeegee away air bubbles and redundant water with a scraper or hard card (Don't move it again for 24 hours)

Step 7. Much easier than Wall Decals, 2 people work together more efficiently.

Step 8. Enjoy your works! If you want to remove it, simply peel the window film from any corner. It comes off leaving no residue cleanly.

Frequently Asked Questions of the AFDB Non Adhesive Frosted Home Office Films Privacy Window Stickers

Q1: Why does the film peel off?

A1: Clean the surface thoroughly and make sure the surface is clean enough without any dust. Make sure to remove the first tier of the protection film before applying on the window.

Q2: How can the film stick well and lets bubbles disappear?

A2: Use enough water. The more flowing water , the better.

Q3: Can I use the No adhesive self static window films if I live in the cold north?

A3: Please use a hair dryer to soften the film or soak the film in warm water under cold weather.